Textile Testing Equipment Pneumatic Bursting Strength Tester With Four Testing Modes
Product Instruction
The Pneumatic Autoburst is designed to determine the bursting strength and distension of specimens using pneumatic inflation method. Testing scope covers: woven, knitted and non-woven fabrics, papers and carton boards.
- Two testing modes: Automatic Bursting Mode and Fixed Flow Rate Bursting Mode can meet the requirement of existing standards.
- Non-contact Laser Displacement Sensor measures the height of the diaphragm to max. 70mm. It is more accurate than traditional LVDT sensor. Sensor rod will not contact with diaphragm during testing. It ensures the longer lifetime of the diaphragms.
- Testing pressure ranges from 100kPa to 1000kPa, can meet the testing needs of various textile fabrics.
- Clamp pressure can be adjusted according to the pressure applied to the specimen, avoiding damaging the specimen due to applying overly high pressure on the specimen.
- Six types of testing kits (testing bells and clamping plates), meet the different testing requirements.
- Auto Recognition of the testing bells and clamping plates preventing mis-assembly.
- Transparent protection shelf and LED illumination makes it easy to observe the testing process.
- Touchscreen control, easy operation. The test can be performed without using PC software.
- Touchscreen controller can save up to 8 batches of testing data.
Two test modes:
a) Automatic Bursting Mode: Specimen bursting is controlled to be within 20±5 seconds.
b) Fixed Flow Rate Bursting Mode: Flow rate(5-100kPa/s)can be set to meet different test methods, such as the M&S test standard.
Applications
Testing the knitted, woven and non-woven fabric, paper and cardboard for largest height and bursting pressure values.
Standards
| ASTM D3786-06 |
|
ISO 13938-2 |
|
ISO 2758 |
| EDANA 80.3-99 |
|
NEXT 22 |
|
IWS TM29 |
| GB/T 7742.1 |
|
Woolmark TM29 |
|
M&S P27 |
Order Information
RF306A Pneumatic Autoburst
RF306A/1 Diaphragms (pack of 10pcs)
RF306A/2 Bell and clamping ring set: 7.1cm2 (diameter: 30mm)
RF306A/3 Bell and clamping ring set: 7.3cm2 (diameter: 30.5mm)
RF306A/4 Bell and clamping ring set: 7.55cm2(diameter: 31mm)
RF306A/5 Bell and clamping ring set: 10cm2 (diameter: 35.7mm)
RF306A/6 Bell and clamping ring set: 50cm2 (diameter: 79.8mm)
RF306A/7 Bell and clamping ring set: 100cm2 (diameter: 113mm)
RF306A/8 Silent Laboratory Compressor
RF306A/9 Booster/Regulator (Optional)
